This deep groove ball bearing, crafted from robust carbon steel, delivers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and longevity under radial and axial loads.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 94mm |
| Width | 22mm |
Built to exacting engineering tolerances, this 73mm ID x 94mm OD x 22mm deep groove ball bearing is manufactured from high-grade carbon steel, offering superior hardness, wear resistance, and load-carrying capacity. The raceway geometry is optimized for minimal friction and extended service life, making it ideal for applications requiring high rotational speeds and significant thrust loads. Its robust construction ensures reliability in environments subject to vibration and shock, maintaining operational integrity. The carbon steel material provides excellent dimensional stability and resistance to deformation under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing's inner ring and the shaft. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with excessive force or impact, leading to brinelling or race damage. | Use a proper bearing press or a bearing heater/cooler to install the bearing. Apply force evenly to the inner ring only. |
| Contaminating the bearing during installation by handling with dirty hands or exposing it to dirt and dust. | Always handle bearings with clean hands or appropriate tools. Keep bearings in their original packaging until ready for installation and work in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||