This brass deep groove ball bearing is engineered for superior performance and longevity in demanding power transmission systems. Its robust brass construction ensures excellent corrosion resistance and reliable operation under various conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 72mm |
| Outside Diameter | 147mm |
| Width | 47mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 72mm, an outside diameter of 147mm, and a width of 47mm. Constructed from high-grade brass, it offers exceptional resistance to corrosion and chemical attack, making it suitable for environments where traditional steel bearings may degrade. The material's inherent lubricity also contributes to reduced friction and extended service life. This bearing is designed to handle significant radial and axial loads, ensuring smooth and efficient power transfer in a wide array of industrial machinery, including gearboxes, pumps, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation after installation and before applying operational loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during press-fitting. | Always apply force to the outer ring when installing into a housing and to the inner ring when installing onto a shaft. |
| Installing without proper lubrication. | Apply a suitable grease or oil to the bearing raceways before installation to ensure initial lubrication. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, High-Speed Pumps, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||