This robust deep groove ball bearing, crafted from durable carbon steel, offers exceptional load-bearing capacity and low friction for critical power transmission systems. Precisely engineered for reliability.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 68mm |
| Outside Diameter | 187mm |
| Width | 15mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 68mm inside diameter, a 187mm outside diameter, and a 15mm width. Constructed from high-grade carbon steel, it provides excellent hardness, wear resistance, and load-carrying capabilities. Its optimized raceway geometry ensures smooth rotation and minimizes vibration, making it ideal for applications requiring high speed and radial or axial load support. The integrated seal design (if applicable, otherwise omit) protects against contaminants. Rigorous testing guarantees adherence to precise tolerances for consistent performance and extended service life in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and within specified tolerances. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify free rotation and check for any signs of binding or excessive noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Always apply force to the ring that is being fitted onto its mating surface (inner ring to shaft, outer ring to housing). |
| Using a damaged or contaminated bearing. | Inspect the bearing for any signs of damage or contamination before installation. Clean with appropriate solvent if necessary. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors, Gearboxes, Pumps, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||