This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Engineered for reliability in demanding power transmission applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 143mm |
| Width | 9mm |
Manufactured under strict quality controls, this 64mm bore x 143mm OD x 9mm width deep groove ball bearing is precision-machined from high-grade carbon steel. This material offers excellent hardness and wear resistance, ensuring longevity under continuous operational stress. Its design accommodates radial and axial loads, making it a versatile component for high-speed rotation and moderate shock conditions. The tight tolerances ensure minimal play, contributing to reduced vibration and noise in the driven system.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the shaft assembly into the housing, ensuring a snug fit against the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply force to the inner ring when mounting onto the shaft to prevent damage to the raceways and seals. |
| Improper lubrication before initial use. | Ensure the bearing is adequately lubricated according to manufacturer specifications before operating. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||