This robust Deep Groove Ball Bearing, constructed from durable carbon steel, offers exceptional load-bearing capacity and smooth rotational performance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 133mm |
| Width | 35mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing features a precise 64mm inside diameter and a 133mm outside diameter, with a standard 35mm width. Engineered from high-carbon steel, it provides superior hardness, wear resistance, and load-carrying capabilities. Its design minimizes friction and heat generation, ensuring efficient power transfer and extended service life in demanding industrial environments, suitable for high radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly. 2. Carefully press or gently tap the bearing onto the shaft or into the housing, ensuring even pressure. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or cracking. | Use a bearing press or appropriate tools to apply even pressure, avoiding direct hammer impact on the races. |
| Improper lubrication, resulting in premature wear or overheating. | Ensure the bearing is adequately lubricated with the recommended grease or oil for the specific operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||