This brass deep groove ball bearing offers exceptional load handling and smooth operation. Its robust construction ensures reliability in demanding power transmission applications where corrosion resistance is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 63mm |
| Outside Diameter | 66mm |
| Width | 44mm |
Designed for demanding industrial environments, this brass deep groove ball bearing features an inside diameter of 63mm, an outside diameter of 66mm, and a width of 44mm. The high-quality brass construction provides excellent corrosion resistance, making it ideal for applications exposed to moisture or chemical environments. Its superior material properties ensure low friction and extended service life under significant radial and axial loads. This bearing is engineered for optimal performance in high-speed rotational applications within machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Proper lubrication according to manufacturer specifications is critical. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to avoid misalignment and damage to raceways. 3. Verify the bearing rotates freely and without excessive noise or vibration before full load application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing with excessive or uneven force during installation. | Use a proper bearing press or induction heater for controlled installation. Apply force only to the ring being mounted. |
| Insufficient or incorrect lubrication. | Consult the bearing's data sheet for the recommended lubricant type and quantity. Re-lubricate at specified intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||