This robust Deep Groove Ball Bearing, constructed from high-grade carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Engineered for reliability in demanding power transmission applications, it ensures consistent operational efficiency.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 149mm |
| Width | 43mm |
Manufactured under strict quality controls, this deep groove ball bearing features a precise 62mm inside diameter, a substantial 149mm outside diameter, and a 43mm width, all within tight tolerances. Crafted from premium carbon steel, it provides superior hardness, tensile strength, and wear resistance, making it ideal for applications subjected to significant radial and axial loads. Its robust construction ensures extended service life even under harsh operating conditions, minimizing downtime and maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or lubricant. 2. Apply a thin, even layer of appropriate lubricant to the bearing and shaft surfaces. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication during installation or operation. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil for the operating conditions. |
| Applying excessive force during mounting, leading to brinelling. | Use a proper bearing mounting tool or press, applying force only to the ring being fitted to avoid damaging the raceways. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||