This brass deep groove ball bearing offers superior corrosion resistance and excellent electrical insulating properties, making it ideal for harsh environments. Its robust design ensures reliable performance in power transmission systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 60mm |
| Outside Diameter | 116mm |
| Width | 31mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features a 60mm inside diameter, 116mm outside diameter, and a 31mm width. Constructed from high-grade brass, it exhibits excellent resistance to corrosion and chemical degradation, making it suitable for wet or chemically aggressive environments. The inherent low friction of brass also contributes to efficient power transmission and reduced wear. This bearing is engineered to withstand moderate radial and axial loads, ensuring smooth, low-noise operation and extended service life in a variety of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid damaging the races. 3. Verify that the bearing rotates freely and without excessive play after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to race deformation. | Use a hydraulic press or an appropriately sized bearing installer tool to apply force evenly to the race being mounted. |
| Contamination of bearing surfaces during handling or installation. | Keep bearing surfaces clean by handling with clean gloves and installing in a clean environment. Avoid exposing the bearing to dust or debris. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Chemical processing equipment, Marine applications, Electrical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||