This 0.984" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Its versatility makes it a prime choice for demanding fabricating tasks.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.984" |
| Length | 29" |
| Width | 43" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet boasts a substantial 0.984" (25mm) thickness, a 29" (736mm) length, and a 43" (1092mm) width. As a T6 temper alloy, it exhibits excellent weldability, brazing, and machinability, coupled with good corrosion resistance and moderate strength. This makes it exceptionally suited for structural components, frames, and load-bearing applications in marine, automotive, and general fabrication industries where durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or machining process is performed with appropriate tooling and coolant for aluminum. 2. Clean the surface thoroughly to remove any oils or debris before welding or bonding. 3. Apply appropriate finishing treatments as required by the application's environmental exposure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments for aluminum. | Utilize high-speed steel or carbide tooling specifically designed for aluminum, with appropriate rake angles and speeds to prevent chip welding and ensure clean cuts. |
| Neglecting surface preparation before welding, leading to porosity and weak joints. | Thoroughly degrease and mechanically abrade the weld joint area to remove oxide layers and contaminants. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body panels, Marine structures and fittings, Industrial machinery frames, Weldments requiring high strength.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||