This premium Aluminum 6061 stock sheet, precisely cut to 0.378" x 22" x 44", offers superior strength and corrosion resistance for demanding material handling environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.378" |
| Length | 22" |
| Width | 44" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet is manufactured from a heat-treatable alloy known for its excellent strength-to-weight ratio and weldability. With a nominal thickness of 0.378 inches, a width of 44 inches, and a length of 22 inches, this material is ideal for fabricating custom shelving, robust support structures, and specialized components within material handling systems. Its composition of aluminum, magnesium, and silicon ensures high tensile strength and yield strength, resisting deformation under load and offering excellent performance in various operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Prepare cut edges using appropriate deburring tools. 3. Secure sheet to supporting structure using suitable fasteners and welding techniques based on load requirements and material compatibility.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect fastener selection leading to structural compromise. | Consult engineering drawings or load calculations to determine appropriate fastener grade, size, and quantity. |
| Overheating during welding, causing loss of temper and reduced strength. | Utilize proper welding procedures and heat input control for 6061-T6 aluminum to maintain its mechanical properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom shelving and racking systems, Conveyor system components and frames, Support structures for automated guided vehicles (AGVs).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||