This 0.319-inch thick 6061 aluminum sheet provides a stable, readily workable surface for demanding abrading and polishing operations. Its uniform composition ensures consistent results across its 29" x 39" dimensions.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.319" |
| Length | 29" |
| Width | 39" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet offers superior dimensional stability for critical fabrication. With a thickness of 0.319 inches, a length of 29 inches, and a width of 39 inches, it is manufactured from a heat-treatable alloy known for its excellent strength-to-weight ratio, weldability, and resistance to corrosion. This combination of properties makes it an ideal substrate for various abrading and polishing processes, from surface preparation to achieving fine finishes in demanding industrial and artistic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface intended for abrading or polishing is clean and free of contaminants. 2. Secure the aluminum sheet firmly to prevent movement during the process. 3. Apply appropriate abrasive or polishing media and proceed with the operation, maintaining consistent pressure and technique.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grit of abrasive for the desired finish. | Consult material finishing guides or perform test runs to determine the optimal abrasive grit for your specific application and desired surface roughness. |
| Inconsistent pressure application during abrading or polishing. | Employ a consistent and even pressure across the entire surface to achieve a uniform finish and avoid localized wear or damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Surface preparation for coatings and adhesives, Achieving fine decorative finishes, Creating reflective surfaces, Deburring and edge finishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||