This 5.9" Schedule 80 seamless pipe, crafted from high-grade 304 stainless steel, offers superior corrosion resistance and structural integrity. Engineered for demanding fluid transfer and structural applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.9" |
| Outside Diameter | 5.427" |
| Wall Thickness | 0.332" |
Specified by design engineers worldwide, this 304 stainless steel seamless pipe adheres to stringent Schedule 80 dimensional tolerances. With a nominal pipe size of 5.9 inches, it features an accurate outside diameter of 5.427 inches and a substantial wall thickness of 0.332 inches, ensuring high pressure handling and robust performance. The inherent properties of 304 stainless steel, including excellent resistance to a wide range of corrosive media and elevated temperatures, make this pipe ideal for critical industrial environments. Its seamless construction eliminates weld-related weaknesses, providing a reliable conduit for challenging fluid conveyance and structural support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean, free of debris, and properly beveled according to welding specifications. 2. Fit the pipe into the system, aligning it with mating components and confirming proper support. 3. Weld using appropriate 304L filler material and certified procedures to ensure full joint penetration and integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures or filler materials for 304 stainless steel. | Always use 304L filler metal and follow ASME Section IX or equivalent welding codes for stainless steel to prevent carbide precipitation and maintain corrosion resistance. |
| Improper pipe end preparation, leading to poor weld quality. | Ensure ends are precisely cut, deburred, and beveled to the required angle and land, creating a V-groove for optimal weld penetration. |
A: This Seamless Pipe, Schedule 80 is manufactured from 304 Stainless Steel.
A: High-pressure fluid transfer in chemical processing, Corrosive fluid handling in marine environments, Structural components in corrosive industrial settings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||