This premium deep groove ball bearing, crafted from lightweight yet strong Aluminum 6061, offers exceptional performance in power transmission applications. Designed for low friction and high load capacity.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 58mm |
| Outside Diameter | 95mm |
| Width | 48mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 58mm, an outside diameter of 95mm, and a width of 48mm. Constructed from Aluminum 6061, it provides excellent strength-to-weight ratio, superior corrosion resistance, and good thermal conductivity, making it ideal for environments where weight reduction or resistance to corrosive elements is paramount. Its design accommodates radial and axial loads, ensuring smooth and efficient operation in high-speed rotational machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or bearing installer. 3. Verify proper seating and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation. | Use precision alignment tools to ensure the bearing is perfectly aligned with the shaft and housing before pressing. |
| Over-tightening during press-fit installation. | Apply controlled force and monitor the press operation to avoid excessive stress on the bearing races and seals. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: High-speed electric motors, Automotive power steering systems, Lightweight industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||