This Schedule 40 seamless nylon pipe offers exceptional strength and chemical resistance. Its precise dimensions ensure reliable fluid transfer and integrity in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 5.8" |
| Outside Diameter | 6.001" |
| Wall Thickness | 0.475" |
Engineered for reliability and performance, this 5.8" Schedule 40 seamless nylon pipe boasts an outside diameter of 6.001" and a substantial wall thickness of 0.475". Manufactured from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and resistance to a broad spectrum of chemicals, oils, and solvents. This robust construction makes it suitable for high-pressure fluid conveyance, pneumatic systems, and applications where material degradation is a concern. The seamless design eliminates potential leak paths, ensuring system integrity and extended service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to threaded connections as per system requirements. 3. Carefully thread the pipe into the fitting, ensuring a snug fit without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible sealants or adhesives that degrade nylon. | Consult chemical compatibility charts for nylon to select appropriate sealants and adhesives. |
| Overtightening fittings, potentially causing stress fractures in the nylon pipe. | Hand-tighten fittings and then use a wrench for an additional quarter to half turn, or as specified by the fitting manufacturer. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: High-pressure fluid transfer systems, Pneumatic control lines, Chemical processing and distribution.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||