Engineered for demanding environments, this 5.8" Schedule 80 seamless carbon steel pipe offers superior integrity and performance. Its robust construction ensures reliability in critical fluid and gas transport.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.8" |
| Outside Diameter | 5.541" |
| Wall Thickness | 0.484" |
Manufactured under strict quality controls, this carbon steel seamless pipe conforms to rigorous industry standards. It features a nominal pipe size of 5.8 inches, with a precise outside diameter of 5.541 inches and a substantial wall thickness of 0.484 inches. This configuration provides a high burst strength and excellent resistance to pressure, making it suitable for high-pressure, high-temperature, and corrosive fluid applications. The seamless construction eliminates weld seams, ensuring uniform wall thickness and enhanced structural integrity, crucial for safety-critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support spacing to prevent sagging and stress. 2. Thoroughly clean pipe ends to remove any debris or scale before welding or joining. 3. Verify compatibility of fittings and welding consumables with the carbon steel material and service conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe supports leading to premature failure. | Consult engineering drawings or industry standards for correct support type and spacing based on pipe diameter, length, and fluid density. |
| Contaminating pipe ends during handling or preparation, leading to poor weld quality. | Store pipe in a clean, protected area and use appropriate cleaning tools and procedures immediately before joining. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transmission, Petrochemical and refinery piping systems, Power generation steam lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||