Engineered for superior performance, this deep groove ball bearing is constructed from robust carbon steel. It offers exceptional load-bearing capacity and reliable operation in various power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 74mm |
| Width | 21mm |
Built to exacting engineering tolerances, this deep groove ball bearing (part number XXXXXX) features an inside diameter of 56mm, an outside diameter of 74mm, and a width of 21mm. Manufactured from high-grade carbon steel, it provides excellent hardness and wear resistance, ensuring consistent performance under radial and axial loads. Its precisely machined raceways and high-quality balls minimize friction and heat generation, making it ideal for applications demanding durability and efficiency in power transmission, such as electric motors, gearboxes, and industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing in its housing using appropriate retaining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with excessive force. | Use a proper bearing press or a bearing heater to ensure even pressure and prevent damage to the bearing races or balls. |
| Improper lubrication during installation. | Apply the recommended lubricant generously to the bearing before and during installation to ensure adequate initial lubrication. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Industrial Conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||