This 5.6" Schedule 40 brass seamless pipe offers superior corrosion resistance and durability. Engineered for reliable fluid conveyance in challenging industrial applications, ensuring long-term performance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 5.6" |
| Outside Diameter | 1.487" |
| Wall Thickness | 0.177" |
Designed for demanding industrial environments, this brass seamless pipe conforms to Schedule 40 dimensions, featuring a nominal pipe size of 5.6 inches, an outside diameter of 1.487 inches, and a precise wall thickness of 0.177 inches. Brass alloy composition provides excellent resistance to a wide range of corrosive media, including water, mild acids, and salts, making it suitable for hydraulic systems, pneumatic lines, and general fluid transfer where material integrity is paramount. Its seamless construction eliminates weld seams, enhancing its pressure handling capabilities and preventing potential leak points.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate thread sealant or flux to threaded connections as per coupling manufacturer's recommendations. 3. Carefully thread pipe into fittings, ensuring a snug fit without over-tightening to prevent stress on the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of sealant for brass fittings. | Always use sealants specifically formulated for brass or compatible with brass alloys to prevent corrosion or degradation of the pipe material. |
| Over-tightening connections, leading to pipe deformation. | Tighten fittings until snug, then apply an additional quarter to half turn. Refer to fitting manufacturer's torque specifications if available. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic fluid transfer systems, Pneumatic control lines, Corrosive fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||