This Schedule 40 seamless nylon pipe, measuring 5.6 inches in nominal size with a 4.806-inch outside diameter and 0.147-inch wall thickness, provides exceptional strength and chemical inertness for diverse industrial fluid transfer systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 5.6" |
| Outside Diameter | 4.806" |
| Wall Thickness | 0.147" |
Engineered for reliability and performance, this 5.6" Schedule 40 seamless nylon pipe boasts a precise 4.806" outside diameter and a robust 0.147" wall thickness, ensuring superior pressure handling capabilities and dimensional stability. Nylon's inherent properties of excellent abrasion resistance, chemical inertness to many solvents and oils, and good impact strength make it ideal for demanding industrial environments. Its seamless construction eliminates potential leak paths and ensures uniform flow characteristics, crucial for maintaining system integrity in hydraulic lines, pneumatic systems, and chemical conveyance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate solvent cement or mechanical fittings as per manufacturer specifications. 3. Assemble with firm, even pressure, allowing adequate cure time before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or joining methods for nylon pipe. | Always consult the pipe manufacturer's recommendations for compatible fittings and recommended joining procedures (e.g., solvent cement types, fusion methods). |
| Exceeding the recommended operating pressure or temperature limits for nylon. | Verify that the system's operating parameters are within the defined specifications for this Schedule 40 nylon pipe to prevent failure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic and pneumatic lines, Chemical and solvent conveyance, Industrial fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||