This deep groove ball bearing, constructed from aerospace-grade Aluminum 6061, offers exceptional corrosion resistance and reduced weight for critical power transmission applications. Optimized for smooth, low-friction operation.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 44mm |
| Width | 17mm |
Engineered for reliability and performance, this deep groove ball bearing features an internal diameter (ID) of 55mm, an external diameter (OD) of 44mm, and a width of 17mm. The Aluminum 6061 alloy provides a superior strength-to-weight ratio and excellent resistance to environmental degradation, making it ideal for applications where traditional steel bearings may be susceptible to corrosion or add undue weight. Its precise geometry ensures minimal radial and axial play, facilitating efficient power transfer in electric motors, gearboxes, and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner race. 3. Secure the bearing within its housing, ensuring proper seating and axial retention.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer race during shaft installation | Always apply force to the inner race when installing the bearing onto the shaft to prevent damage to the ball raceways. |
| Over-tightening retention mechanisms | Ensure retention mechanisms (e.g., snap rings, collars) are snug but do not exert excessive force that could distort the bearing races. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Industrial Gearboxes, Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||