This 5.5-inch Schedule 80 seamless carbon steel pipe offers exceptional strength and durability for demanding applications. Engineered for high-pressure fluid and gas conveyance, it ensures reliable performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 5.5" |
| Outside Diameter | 1.795" |
| Wall Thickness | 0.326" |
Specified by design engineers worldwide, this 5.5" O.D. Schedule 80 seamless carbon steel pipe features a nominal wall thickness of 0.326". Manufactured to ASTM A106 Grade B standards, its robust construction provides superior tensile and yield strength suitable for high-pressure fluid transfer, steam lines, and hydraulic systems. The seamless design eliminates potential leak paths inherent in welded pipes, ensuring integrity under extreme operational conditions and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material grade against project specifications. 2. Prepare pipe ends for connection using approved cutting and beveling techniques. 3. Install using appropriate welding procedures or flanged connections as per ASME B31.1 or B31.3.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong pipe schedule for the intended pressure rating. | Always consult pressure-temperature charts and engineering calculations to select the correct Schedule (e.g., Schedule 80) for the application's requirements. |
| Inadequate preparation of pipe bevels for welding. | Ensure precise bevel angles and root face dimensions as specified by welding codes to achieve sound, full-penetration welds. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transmission, Hydraulic systems, Steam piping, Oil and gas industry infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||