Engineered for reliability in power transmission, this deep groove ball bearing features a robust nylon construction. Its dimensions ensure compatibility with standard industrial setups, offering efficient rotational support.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 54mm |
| Outside Diameter | 92mm |
| Width | 45mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an inside diameter of 54mm, an outside diameter of 92mm, and a width of 45mm. The high-performance nylon material provides excellent corrosion resistance, reduced weight, and superior electrical insulation compared to traditional steel bearings, making it ideal for environments where moisture or chemical exposure is a concern. Its design ensures smooth, low-friction operation, minimizing energy loss and extending component life in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing bore and shaft to remove any debris or lubricant. 2. Carefully press the bearing into the housing or onto the shaft using a suitable arbor press or bearing installer. 3. Ensure the bearing is seated squarely and flush against its locating shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to race deformation. | Use a bearing press or appropriate driver to apply even pressure only to the bearing ring being fitted. |
| Improper lubrication or using incorrect lubricant for nylon bearings. | Consult manufacturer guidelines for compatible lubricants; avoid petroleum-based lubricants that can degrade nylon. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||