This seamless carbon steel pipe, conforming to Schedule 40 standards, offers superior strength and reliability for critical fluid and gas transport applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 5.4" |
| Outside Diameter | 1.408" |
| Wall Thickness | 0.190" |
Manufactured under strict quality controls, this 5.4" nominal pipe size seamless carbon steel pipe features an exact outside diameter of 1.408 inches and a wall thickness of 0.190 inches. Its carbon steel composition provides excellent tensile strength and toughness, making it suitable for moderate pressure and temperature services. The seamless construction ensures uniform wall thickness, eliminating potential leak paths inherent in welded pipes and enhancing its suitability for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material against project specifications. 2. Clean pipe ends thoroughly to remove any debris or contaminants. 3. Perform proper joining method (e.g., welding, threading) according to industry best practices and applicable codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe size or schedule for the intended application. | Always cross-reference project requirements with pipe specifications to ensure compatibility. |
| Inadequate cleaning of pipe ends before joining. | Ensure pipe ends are free from dirt, grease, and other foreign matter to guarantee a strong, leak-free connection. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: General fluid and gas transmission lines, Low to medium pressure steam lines, Water distribution systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||