This carbon steel deep groove ball bearing, with precise dimensions of 51x75x22mm, offers robust performance in demanding power transmission applications. Engineered for longevity and efficiency.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 51mm |
| Outside Diameter | 75mm |
| Width | 22mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing is manufactured from high-quality carbon steel, ensuring excellent hardness and wear resistance for superior load-bearing capacity. Its 51mm inside diameter, 75mm outside diameter, and 22mm width provide a standard fit for numerous power transmission systems. The internal geometry is optimized for minimal friction and high rotational speeds, making it ideal for applications requiring smooth, reliable operation under radial and axial loads. Rigorous quality control guarantees consistent performance and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply force to the ring (inner for shaft mounting, outer for housing mounting) that is being fitted. |
| Improper lubrication leading to premature wear. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil as specified for the application. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||