This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Precisely manufactured for demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 51mm |
| Outside Diameter | 73mm |
| Width | 7mm |
Engineered for reliability and performance, this 51mm ID x 73mm OD x 7mm W deep groove ball bearing is fabricated from high-grade carbon steel, ensuring superior hardness, wear resistance, and load-carrying capability. Its single-row, non-separable design with a deep raceway groove minimizes friction and accommodates both radial and axial loads. Ideal for applications requiring consistent operation under moderate speeds and loads, such as electric motors, pumps, and general machinery. The carbon steel construction provides excellent durability and cost-effectiveness for industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and shaft mounting surfaces thoroughly to remove any debris or lubricant. 2. Apply a thin, even layer of appropriate lubricant to the shaft and inner ring of the bearing. 3. Carefully press the bearing onto the shaft, ensuring it seats squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to raceways. | Use a bearing installer tool or a controlled pressing operation. Ensure the force is applied to the inner ring only. |
| Insufficient or improper lubrication, causing premature wear and overheating. | Consult the bearing manufacturer's lubrication guidelines for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps and Compressors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||