This 5.1" Schedule 40 seamless brass pipe offers superior corrosion resistance and excellent machinability for critical industrial fluid transfer and structural components. Its robust construction ensures reliability.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.1" |
| Outside Diameter | 2.120" |
| Wall Thickness | 0.411" |
A proven choice for industrial professionals, this 5.1" Schedule 40 seamless pipe features a precise 2.120" outside diameter and a substantial 0.411" wall thickness. Manufactured from high-quality brass, it exhibits exceptional resistance to corrosion, pitting, and dezincification, making it ideal for demanding environments. The seamless construction ensures uniform wall thickness and superior pressure containment capabilities, crucial for hydraulic systems, chemical processing, and general fluid conveyance where integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free from surface imperfections. 2. Apply appropriate brass-compatible flux to both the pipe end and the fitting socket. 3. Heat the joint evenly with a torch, then introduce solder to the capillary action. 4. Allow the joint to cool undisturbed before testing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during soldering, leading to flux burnout and weak joints. | Maintain a consistent, moderate heat source, allowing the flux to indicate readiness for solder application. |
| Improperly cleaning pipe and fitting surfaces, resulting in poor solder adhesion. | Thoroughly clean both the pipe end and the fitting socket with an approved abrasive cleaner before fluxing. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Hydraulic and Pneumatic Systems, Chemical Processing and Transfer, Structural Components in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||