This deep groove ball bearing, constructed from robust carbon steel, offers superior load-bearing capabilities and low-friction operation. Engineered for reliability in power transmission systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 161mm |
| Width | 46mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a precise 50mm inner diameter, a substantial 161mm outer diameter, and a 46mm width. Manufactured from high-quality carbon steel, it exhibits excellent hardness and wear resistance, ensuring consistent performance under radial and axial loads. Its design minimizes friction, leading to enhanced energy efficiency and extended operational lifespan in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces and bearing thoroughly. 2. Apply a thin, uniform layer of appropriate lubricant to the shaft and bearing bore. 3. Carefully press or drive the bearing onto the shaft using a bearing installer or press, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the bearing races. | Utilize a proper bearing installer tool or a hydraulic press, applying force only to the ring being fitted. |
| Contaminating the bearing with dirt or debris during handling and installation. | Keep the bearing in its original packaging until ready for installation and ensure all surrounding components are clean. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||