This deep groove ball bearing, constructed from lightweight Aluminum 6061, offers efficient rotational performance for moderate loads. Its robust design ensures reliable operation in power transmission systems where weight is a critical factor.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 59mm |
| Width | 27mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 50mm, an outside diameter of 59mm, and a width of 27mm. The Aluminum 6061 alloy provides excellent machinability and corrosion resistance in non-challenging environments, offering a significant weight reduction compared to steel bearings. This material choice makes it suitable for applications where galvanic corrosion is not a concern, such as certain consumer electronics, automation equipment, and light-duty conveyor systems. The bearing geometry is optimized for high speed and low friction, minimizing power loss and heat generation under specified load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and shaft mating surfaces thoroughly. 2. Gently press the bearing onto the shaft, ensuring it is seated square and fully engaged. 3. Secure the bearing in its housing using appropriate retaining methods (e.g., snap rings, shoulders).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Use a bearing press or a correctly sized drift to apply force evenly to the outer ring when mounting into a housing, and to the inner ring when mounting onto a shaft. |
| Contaminating the bearing during installation or operation. | Handle bearings in a clean environment and ensure seals are intact and properly seated. Avoid exposing the bearing to dust, dirt, or corrosive substances. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Light-duty conveyor systems, Consumer electronics, Small automation equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||