This 5-inch Schedule 40 seamless carbon steel pipe offers robust performance. Its 0.255-inch wall thickness provides excellent pressure handling for critical fluid conveyance and structural support in demanding environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.0" |
| Outside Diameter | 4.840" |
| Wall Thickness | 0.255" |
Trusted by engineers across multiple sectors, this 5.0" nominal size seamless carbon steel pipe conforms to rigorous industry standards for pressure piping. Featuring a precise 4.840" outside diameter and a substantial 0.255" wall thickness, it offers superior structural integrity and pressure containment. The carbon steel material provides excellent weldability and resistance to common industrial fluids, making it ideal for high-pressure, high-temperature, and corrosive fluid transport systems, as well as general construction and mechanical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, beveled, and free from defects. 2. Align pipe sections accurately for welding or threading. 3. Apply appropriate welding consumables or sealant for the specified service conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe for the pressure rating. | Always verify the pipe's schedule and material compatibility with the system's operating pressure and fluid type. |
| Improper beveling for welding. | Ensure consistent and correct bevel angles are achieved to facilitate full penetration welds and prevent stress concentrations. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid conveyance (water, oil, gas), Structural support in industrial facilities, Boiler and heat exchanger tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||