Engineered for superior performance in power transmission systems, this deep groove ball bearing features a lightweight yet robust Aluminum 6061 construction. Its precise dimensions ensure smooth, low-friction operation.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 69mm |
| Width | 7mm |
A high-performance industrial component, this deep groove ball bearing boasts an Inside Diameter (ID) of 49mm, an Outside Diameter (OD) of 69mm, and a Width of 7mm. Constructed from Aluminum 6061, it offers an excellent strength-to-weight ratio, superior corrosion resistance compared to steel in certain environments, and good machinability. This material selection makes it ideal for applications where weight reduction is critical or where exposure to mild corrosive elements is expected. The deep groove design allows it to accommodate significant radial loads and moderate axial loads in both directions, ensuring reliable operation in demanding power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply even pressure to seat the bearing, avoiding hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling. | Use a bearing installer tool or a press with proper alignment and controlled force. |
| Incorrect shaft or housing fit, causing premature wear. | Verify shaft and housing dimensions meet specified tolerances for the bearing type. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motors and generators, Conveyor systems, Pumps and compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||