This Schedule 80 seamless nylon pipe, with a 4.9" nominal size, 2.890" OD, and 0.142" wall thickness, provides robust fluid conveyance. Its inherent material properties ensure reliability in challenging environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 2.890" |
| Wall Thickness | 0.142" |
Specified by design engineers worldwide, this seamless nylon pipe conforms to stringent performance requirements. The 2.890" outside diameter and 0.142" wall thickness define its Schedule 80 rating, offering superior pressure containment. Nylon's excellent tensile strength, abrasion resistance, and broad chemical compatibility make it ideal for conveying a wide range of industrial fluids, including hydraulic oils, solvents, and mild chemicals. Its seamless construction eliminates potential leak paths, ensuring operational integrity in high-vibration or critical application scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage or debris prior to connection. 2. Ensure proper fitting compatibility and tighten connections according to manufacturer specifications. 3. Perform pressure testing to verify system integrity before full operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings that can lead to leaks or joint failure. | Always verify that fittings are rated for nylon pipe and the specific pressure and temperature requirements of the application. |
| Over-tightening threaded connections, potentially crushing the pipe wall. | Follow recommended torque values for fittings to avoid damaging the nylon pipe and ensure a secure seal. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic fluid lines, Pneumatic systems, Chemical transfer lines, Industrial lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||