This 4.9" Schedule 40 seamless brass pipe offers superior corrosion resistance and excellent machinability for critical fluid conveyance and structural applications. Engineered for demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 1.781" |
| Wall Thickness | 0.263" |
Specified by design engineers worldwide, this brass seamless pipe meets stringent performance requirements. With an Outside Diameter (OD) of 1.781 inches and a robust Wall Thickness of 0.263 inches, it conforms to Schedule 40 dimensions, ensuring compatibility with standard fittings. The inherent properties of brass, including excellent ductility, high tensile strength, and superior resistance to dezincification and general corrosion, make it an ideal choice for handling a wide range of fluids, including water, steam, and certain chemicals, as well as for decorative and structural components where longevity and aesthetic appeal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate flux and solder to joints. 3. Heat joint evenly and apply solder until it flows completely around the joint. 4. Allow joint to cool undisturbed before pressure testing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible soldering materials for brass. | Always use solders and fluxes specifically designed for brass and copper alloys. |
| Overheating the brass pipe during soldering. | Apply heat judiciously to achieve proper solder flow without compromising material integrity. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance systems (water, steam, gas), Heat exchangers and condensers, Decorative and architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||