Engineered for demanding applications, this 4.6-inch Schedule 80 seamless nylon pipe offers superior strength and chemical resistance. Its precise dimensions ensure reliable performance in fluid and pneumatic systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 4.755" |
| Wall Thickness | 0.126" |
Built to exacting engineering tolerances, this Schedule 80 seamless nylon pipe features an outside diameter of 4.755 inches and a wall thickness of 0.126 inches, providing a nominal pipe size of 4.6 inches. Manufactured from high-grade nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and robust chemical compatibility with a wide range of fluids, including oils, fuels, and mild solvents. This makes it an ideal choice for high-pressure pneumatic lines, hydraulic systems, and fluid transfer applications where durability and resistance to wear are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate sealant or fitting lubricant to male pipe threads or mating surfaces. 3. Carefully thread or connect the pipe into the desired fitting, ensuring a secure and leak-free joint according to fitting manufacturer's specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings for nylon pipe. | Always use fittings specifically designed or rated for use with nylon piping materials to prevent stress cracking and ensure a secure seal. |
| Over-tightening threaded connections. | Tighten threaded connections until snug, then an additional 1/4 to 1/2 turn. Over-tightening can damage the nylon threads or the fitting. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Pneumatic Control Systems, Hydraulic Fluid Lines, Chemical Transfer Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||