This robust deep groove ball bearing, constructed from high-grade carbon steel, offers exceptional durability and low friction for efficient power transmission in demanding applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 52mm |
| Width | 44mm |
Manufactured under strict quality controls, this carbon steel deep groove ball bearing features a precise 45mm inside diameter, a 52mm outside diameter, and a 44mm width. The high-carbon steel composition provides excellent hardness, wear resistance, and load-carrying capacity, ensuring long service life under radial and axial loads. Its optimized geometry minimizes friction and heat generation, contributing to enhanced energy efficiency and operational reliability in various industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press the bearing onto the shaft, maintaining squareness. 3. Assemble the housing around the bearing, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an undersized shaft or into an oversized housing. | Use appropriate press-fitting procedures and verify shaft/housing dimensions against bearing tolerances. |
| Insufficient lubrication or using the wrong type of lubricant. | Apply a high-quality bearing grease or oil as specified for the operating conditions and temperature range. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||