This robust deep groove ball bearing, constructed from high-grade carbon steel, is engineered for exceptional load-bearing capacity and longevity. Its precise dimensions ensure smooth, efficient power transmission in critical machinery.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 144mm |
| Width | 25mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a 45mm inside diameter and a 144mm outside diameter, with a 25mm width. Fabricated from premium carbon steel, it offers superior hardness, wear resistance, and tensile strength, making it ideal for high-speed rotational applications and moderate axial loads. The raceway geometry is optimized for reduced friction and extended service life under continuous operation. Suitable for environments requiring reliable performance and durability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Gently press the bearing onto the shaft or into the housing using a suitable press or sleeve, applying even force to the correct ring. 3. Verify proper seating and rotate the bearing to confirm smooth operation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press fitting. | Always apply force to the inner ring when mounting on a shaft and to the outer ring when mounting in a housing to prevent internal damage. |
| Improper lubrication, leading to premature wear. | Use the recommended lubricant type and quantity for the specific operating conditions and ensure consistent re-lubrication schedules. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Industrial Gearboxes, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||