Engineered for robust fluid conveyance, this 4.5" Schedule 40 Nylon seamless pipe offers exceptional chemical resistance and durability. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.5" |
| Outside Diameter | 4.161" |
| Wall Thickness | 0.207" |
A proven choice for industrial professionals, this 4.5" Schedule 40 Nylon seamless pipe boasts an outside diameter of 4.161 inches and a wall thickness of 0.207 inches, adhering to rigorous industry standards. Manufactured from high-grade nylon, it provides superior resistance to abrasion, impact, and a wide range of chemicals, making it suitable for pressure systems and fluid transfer applications where integrity is paramount. The seamless construction eliminates potential leak points, ensuring operational safety and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket, per manufacturer's recommendations. 3. Join the pipe and fitting with a twisting motion until fully seated, holding for 30 seconds to set. 4. Allow adequate cure time before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvent cement for nylon. | Always use solvent cement specifically formulated for nylon pipe and fittings to ensure a strong, permanent bond. |
| Insufficient cure time before system operation. | Adhere strictly to the solvent cement manufacturer's recommended cure times, especially under varying temperature conditions, to prevent joint failure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic systems, Chemical processing lines, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||