This deep groove ball bearing, constructed from advanced nylon, offers exceptional performance in power transmission systems. Its robust design and lightweight properties ensure efficient operation and extended service life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 176mm |
| Width | 12mm |
Manufactured under strict quality controls, this 44mm ID x 176mm OD x 12mm width deep groove ball bearing utilizes a high-performance nylon polymer. This material provides inherent corrosion resistance, excellent electrical insulation, and reduced friction compared to traditional steel bearings. Its lightweight nature contributes to lower rotational inertia, ideal for applications requiring high speeds or frequent starts/stops. The deep groove raceway design accommodates moderate radial and axial loads, making it suitable for diverse power transmission scenarios where weight, corrosion, and noise are critical factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct race (inner race for shaft mounting, outer race for housing mounting). 3. Verify smooth rotation and proper seating before engaging the power transmission system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong race during installation. | Always apply installation force to the inner race when mounting on a shaft, and to the outer race when mounting in a housing. |
| Using excessive force or impact during installation. | Employ a controlled press fit or specialized bearing installation tools to avoid damaging the bearing's internal components. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Light-duty machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||