This Schedule 160 seamless pipe, crafted from premium 304 stainless steel, is engineered for extreme pressure and corrosive environments. Its precise dimensions ensure superior flow and structural integrity in critical systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.4" |
| Outside Diameter | 4.953" |
| Wall Thickness | 0.305" |
Engineered for reliability and performance, this 4.4" nominal size seamless pipe boasts an actual outside diameter of 4.953" and a substantial 0.305" wall thickness, conforming to Schedule 160. Manufactured from robust 304 stainless steel, it offers exceptional tensile strength and superior resistance to a wide range of corrosive media, including acids and chlorides. This makes it ideal for high-pressure fluid transfer, chemical processing, and demanding industrial applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including beveling if required by the joining method. 2. Clean both the pipe ends and the fitting surfaces thoroughly to remove any contaminants. 3. Carefully align the pipe and fitting, then proceed with the specified joining method (e.g., welding, threading, flanging) according to industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for stainless steel. | Employ qualified welding procedures and appropriate filler materials specified for 304 stainless steel to prevent sensitization and maintain corrosion resistance. |
| Inadequate pipe end cleaning before joining. | Thoroughly clean pipe ends with approved solvents and brushes to remove grease, oil, and other foreign matter that can compromise the integrity of the joint. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure chemical processing lines, Pharmaceutical fluid transfer systems, Corrosive fluid handling in oil and gas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||