This Schedule 80 seamless carbon steel pipe, with a 4.3" outside diameter and 0.143" wall thickness, offers superior strength and integrity for demanding industrial fluid transport.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.3" |
| Outside Diameter | 1.898" |
| Wall Thickness | 0.143" |
Built to exacting engineering tolerances, this 4.3" seamless pipe conforms to Schedule 80 specifications, ensuring a nominal outside diameter of 4.3" and a precise 0.143" wall thickness. Manufactured from high-grade carbon steel, it exhibits excellent tensile strength and yield strength, making it suitable for applications involving elevated pressures and temperatures. Its seamless construction eliminates weld seams, thereby minimizing potential failure points and ensuring consistent performance in critical fluid conveyance systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free from burrs and foreign material. 2. Apply appropriate thread sealant or welding flux as per application requirements. 3. Carefully align and connect pipe sections using compatible fittings or welding procedures, ensuring proper joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings or welding consumables. | Always verify compatibility of all joining materials with the carbon steel seamless pipe and the conveyed media. |
| Improper alignment leading to stress concentration. | Ensure precise alignment of pipe sections during installation to avoid undue stress on joints and the pipe body. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Steam and hot water distribution, Chemical processing and transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||