This 4.2" Schedule 40 brass seamless pipe offers superior corrosion resistance and ductility. Its precise dimensions ensure reliable performance in demanding fluid handling and structural applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 4.801" |
| Wall Thickness | 0.319" |
Built to exacting engineering tolerances, this 4.2" Schedule 40 seamless brass pipe features a nominal pipe size (NPS) of 4.2 inches, an actual outside diameter (OD) of 4.801 inches, and a substantial wall thickness of 0.319 inches. The brass material provides excellent machinability, moderate strength, and superior resistance to dezincification and general corrosion, making it suitable for potable water systems, general fluid conveyance, and decorative applications where durability and aesthetic appeal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or solder flux as required by the joining method. 3. Carefully thread or solder the pipe into its fitting, ensuring a secure and leak-free connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong thread sealant for brass fittings. | Always use sealants specifically designed or recommended for brass to prevent potential corrosion or material degradation. |
| Over-tightening threaded connections, leading to stress cracks. | Tighten threaded connections firmly but avoid excessive force. Consult fitting manufacturer guidelines for recommended torque specifications. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Potable water distribution systems, General fluid conveyance, Heat exchangers and condensers, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||