This 4" Schedule 80 brass seamless pipe offers superior corrosion resistance and mechanical strength. Engineered for high-pressure, demanding fluid transfer applications, ensuring reliable performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.0" |
| Outside Diameter | 3.147" |
| Wall Thickness | 0.126" |
Built to exacting engineering tolerances, this 4.0" Schedule 80 seamless brass pipe boasts a precise 3.147" outside diameter and a robust 0.126" wall thickness, conforming to industry standards for pressure containment. The inherent properties of brass, including excellent machinability and resistance to dezincification and pitting corrosion, make it ideal for plumbing, HVAC, and industrial fluid handling where aggressive media is present. Its seamless construction eliminates weld-related weaknesses, ensuring uniform strength and integrity under thermal cycling and vibration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Thread the pipe into the fitting, tightening to a snug fit followed by an additional 1/2 to 1 turn, or per manufacturer's recommendation. 4. Verify proper alignment to avoid stress on the connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening threaded connections, leading to cracking. | Use proper tools and follow recommended torque specifications. Hand-tighten plus the specified turn is generally sufficient. |
| Using incorrect thread sealant or tape for brass fittings. | Utilize sealants specifically rated for brass and the intended fluid to prevent corrosion or incompatibility. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Water distribution systems, Chemical processing lines, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||