Engineered for demanding industrial environments, this 4" Schedule 40 seamless Nylon pipe delivers exceptional durability and chemical resistance. Its robust construction ensures reliable fluid and pneumatic system performance under stress.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.0" |
| Outside Diameter | 5.516" |
| Wall Thickness | 0.366" |
Purpose-built for heavy-duty applications, this 4.0-inch nominal size seamless Nylon pipe boasts a precise 5.516-inch outside diameter and a substantial 0.366-inch wall thickness, conforming to Schedule 40 dimensional standards. The inherent properties of Nylon, including excellent abrasion resistance, high tensile strength, and broad chemical compatibility, make it suitable for conveying various fluids and compressed air in challenging operational settings. Its seamless construction eliminates potential leak paths, ensuring system integrity and minimizing maintenance downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. Verify mating fittings are compatible and properly prepared. 2. Apply appropriate solvent cement and primer (if applicable) to both pipe and fitting surfaces according to manufacturer instructions. 3. Assemble pipe and fitting with a firm twisting motion, holding for 30 seconds to allow initial set. 4. Allow adequate cure time based on temperature and humidity before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent cement for Nylon. | Always use a solvent cement specifically formulated for Nylon pipe and fittings to ensure a strong, reliable bond. |
| Insufficient cure time before system pressurization. | Adhere strictly to the solvent cement manufacturer's recommended cure times based on environmental conditions to prevent joint failure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Pneumatic conveying systems, Industrial fluid transfer lines, Hydraulic lines, Chemical processing applications, Automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||