This 4.0-inch Schedule 40 seamless aluminum pipe, crafted from robust 6061 alloy, offers exceptional corrosion resistance and structural integrity for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.0" |
| Outside Diameter | 6.065" |
| Wall Thickness | 0.413" |
Manufactured under strict quality controls, this 4.0-inch Schedule 40 seamless pipe boasts an outside diameter of 6.065 inches and a substantial wall thickness of 0.413 inches. Fabricated from Aluminum Alloy 6061, it exhibits excellent strength-to-weight ratio, good weldability, and superior resistance to atmospheric and seawater corrosion, making it suitable for a wide array of chemical processing, marine, and structural components. The seamless construction ensures uniform wall thickness and enhanced pressure containment capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and support for the pipe sections. 2. Utilize appropriate welding procedures and filler materials for Aluminum 6061, adhering to industry standards. 3. Conduct post-weld inspection and pressure testing to verify integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect welding parameters leading to compromised joint strength. | Consult welding procedure specifications (WPS) for Aluminum 6061 and ensure welder certification. |
| Inadequate cleaning of the pipe ends prior to welding, causing porosity. | Thoroughly degrease and mechanically clean weld joint surfaces to remove oxides and contaminants. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Structural supports in corrosive environments, Chemical processing equipment and piping, Marine and offshore applications, Heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||