This 4-inch polycarbonate U-bolt offers exceptional resistance to corrosive chemicals and electrolysis. Its robust design ensures secure and non-conductive support for piping systems in harsh industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.93" |
| Inside Length ( B) | 2.98" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 4-inch pipe U-bolt features an inside width (A) of 1.93 inches and an inside length (B) of 2.98 inches. Fabricated from high-impact polycarbonate, it provides superior dielectric strength, preventing galvanic corrosion and ensuring electrical isolation. The 1/2"-13 UNC thread size allows for secure fastening with standard hardware. This material choice is ideal for applications exposed to moisture, acids, alkalis, and salt solutions, offering a lightweight yet strong alternative to metal fasteners.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests on a compatible support structure. 2. Thread the nuts onto the bolt ends evenly, applying consistent torque. 3. Verify the pipe is securely held without over-tightening, which could damage the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening of nuts | Tighten nuts until snug, then an additional quarter turn. Avoid excessive force that could deform or crack the polycarbonate. |
| Using incompatible support hardware | Ensure any associated clamps or brackets are made of materials that will not corrode or react with polycarbonate in the intended environment. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing piping, Marine environments, Wastewater treatment facilities, Food and beverage processing, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||