Engineered for demanding environments, this 4" Polycarbonate U-Bolt offers superior corrosion resistance and electrical insulation. Its robust design ensures secure pipe support in corrosive or conductive applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.42" |
| Inside Length ( B) | 6.55" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 4" Polycarbonate U-Bolt is manufactured from high-performance, UV-stabilized polycarbonate, providing exceptional resistance to a wide range of chemicals, acids, and alkalis. The material's inherent dielectric strength makes it ideal for applications where electrical conductivity is a concern. With an Inside Width (A) of 1.42 inches and an Inside Length (B) of 6.55 inches, it is precisely dimensioned for a secure fit on 4-inch nominal pipe. The robust 1/2"-13 UNC threaded rods are integrally molded for maximum strength and resistance to pull-out. Operating temperature range is -40°F to 180°F (-40°C to 82°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe, ensuring proper alignment with mounting surface. 2. Insert the threaded ends of the U-bolt through the designated mounting holes or conduit clamps. 3. Securely fasten using appropriate washers and nuts, tightening evenly on both sides to achieve desired clamping force without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect U-bolt size for the pipe diameter. | Always confirm the pipe's nominal size and select a U-bolt with matching inside dimensions to ensure a snug and secure fit. |
| Over-tightening the nuts, leading to material stress or deformation. | Tighten nuts evenly and firmly, but avoid excessive force that could compromise the polycarbonate's structural integrity. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Electrical conduit support, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||