Engineered for demanding environments, this 4" Nylon U-Bolt provides superior corrosion resistance and vibration dampening. Its robust nylon construction ensures long-term reliability in diverse industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 4.11" |
| Inside Length ( B) | 6.73" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 4" Nylon U-Bolt boasts exceptional chemical resistance and dielectric properties. With an inside width (A) of 4.11" and an inside length (B) of 6.73", it is designed for secure fastening of 4" nominal pipe sizes. The 1/2"-13 UNC thread size on the integrated legs ensures compatibility with standard mounting hardware. Its non-conductive nature makes it ideal for environments where electrical isolation is critical, preventing galvanic corrosion and ensuring safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring proper alignment with the mounting surface. 2. Insert the threaded legs through the mounting holes or bracket. 3. Securely fasten using appropriate washers and nuts (sold separately), tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fasteners, potentially deforming the nylon. | Tighten nuts to the manufacturer's recommended torque specifications for nylon components, ensuring a snug fit without excessive pressure. |
| Using incompatible hardware, such as sharp-edged washers that could damage the nylon. | Utilize flat, broad-surface washers to distribute the load evenly and prevent damage to the nylon material. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Chemical processing plants, Water and wastewater treatment, Marine and offshore installations, Food and beverage industry.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||