Engineered for demanding industrial environments, this 4-inch Nylon U-Bolt offers superior corrosion resistance and non-conductive properties. Its robust design ensures secure pipe support in challenging applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.13" |
| Inside Length ( B) | 7.21" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this 4" Nylon U-Bolt is manufactured from high-strength, chemical-resistant nylon, providing excellent durability in corrosive and wet conditions. With an inside width (A) of 4.13 inches and an inside length (B) of 7.21 inches, it offers ample clearance for standard 4-inch nominal pipe. The integrated 1/2"-13 thread size ensures compatibility with standard mounting hardware. This material selection mitigates galvanic corrosion concerns often encountered with metal fasteners in sensitive applications, making it ideal for plumbing, chemical processing, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe, ensuring proper alignment with mounting surfaces. 2. Thread the nuts onto the U-bolt legs, hand-tightening initially. 3. Using appropriate wrenches, tighten the nuts evenly to secure the pipe, avoiding over-tightening that could deform the nylon. 4. Verify the pipe is held firmly and without excessive stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, causing damage to the nylon. | Tighten nuts incrementally and evenly, using a torque wrench if specifications are available, to prevent deformation. |
| Using the wrong size U-bolt for the pipe diameter. | Confirm the pipe's nominal size and measure the U-bolt's inside dimensions (A and B) to ensure a proper fit before installation. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Chemical processing pipe support, Marine and offshore applications, Plumbing and water systems in corrosive environments, Electrical conduit support where non-conductivity is required.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||