Engineered for demanding environments, this 4" Nylon U-Bolt offers superior corrosion resistance and electrical insulation. Its robust nylon construction ensures reliable support for piping systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.86" |
| Inside Length ( B) | 2.28" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this 4" Nylon U-Bolt is fabricated from high-performance nylon, offering excellent resistance to chemicals, moisture, and UV degradation. With an inside width (A) of 1.86 inches and an inside length (B) of 2.28 inches, it provides a secure fit for 4-inch nominal pipes. The 1/2"-13 UNC thread size ensures compatibility with standard fasteners. This material choice eliminates concerns of galvanic corrosion and is ideal for applications where electrical isolation is critical, such as in offshore, chemical processing, and water treatment facilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and through the mounting surface or conduit. 2. Thread the nuts onto the U-bolt legs until snug. 3. Tighten nuts evenly on both sides to secure the pipe without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts | Tighten nuts until the pipe is held firmly but avoid excessive force that could deform the nylon or pipe. |
| Using the wrong size U-bolt | Verify the nominal pipe size and measure the actual outside diameter to ensure a proper fit for the specified inside dimensions. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Piping support in corrosive environments, Electrical conduit and cable tray securing, Marine and offshore installations, Water and wastewater treatment systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||