Engineered for reliability, this 4" Nylon U-Bolt provides robust and corrosion-resistant pipe support. Its non-conductive properties and vibration dampening make it ideal for sensitive applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.66" |
| Inside Length ( B) | 7.54" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this 4" Nylon U-Bolt is constructed from high-strength nylon, offering excellent resistance to chemicals, moisture, and UV degradation. With an inside width (A) of 3.66 inches and an inside length (B) of 7.54 inches, it is designed to securely accommodate standard 4-inch nominal pipe sizes. The 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers for a secure fastening solution. Its non-metallic composition makes it an excellent choice for environments where galvanic corrosion is a concern or electrical insulation is required, providing reliable structural support and vibration isolation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe sits squarely within the curved section. 2. Thread the appropriate nuts onto both ends of the U-bolt, hand-tightening initially. 3. Tighten the nuts alternately and evenly to achieve the desired clamping force, avoiding over-tightening which can damage the nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts | Tighten nuts until snug, then an additional 1/4 to 1/2 turn. Avoid excessive force that could deform or crack the nylon. |
| Incorrect U-bolt size selection | Verify the nominal pipe size (NPS) and ensure the U-bolt's inside dimensions are appropriate for a secure fit without excessive play. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Plumbing and HVAC pipe support, Electrical conduit clamping, Chemical processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||