This robust deep groove ball bearing, constructed from high-grade carbon steel, offers exceptional load-carrying capacity and smooth rotational performance. Engineered for reliability in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 38mm |
| Outside Diameter | 88mm |
| Width | 41mm |
Manufactured under strict quality controls, this deep groove ball bearing features a precise 38mm inside diameter, an 88mm outside diameter, and a 41mm width. Its construction from high-carbon steel provides superior hardness, wear resistance, and load-bearing capabilities, making it ideal for applications requiring high radial and axial loads. The optimized raceway geometry ensures minimal friction and heat generation, contributing to extended service life and operational efficiency in diverse industrial power transmission settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free of debris. Measure and verify dimensions. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring (inner for shaft mounting, outer for housing mounting). 3. Install retaining rings or other securing mechanisms to prevent axial movement. Lubricate appropriately as per manufacturer recommendations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply press-fitting force directly to the ring being fitted (inner ring on shaft, outer ring in housing) to avoid deforming the other ring and damaging the raceways. |
| Insufficient or incorrect lubrication. | Use the specified lubricant type and quantity for the application's speed and load conditions. Over- or under-lubrication can lead to premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||