This premium 3/8" Schedule 40 brass seamless pipe offers exceptional corrosion resistance and durability. Manufactured to exacting standards, it ensures reliable fluid conveyance for demanding industrial and commercial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 3.8" |
| Outside Diameter | 5.110" |
| Wall Thickness | 0.300" |
Engineered for reliability and performance, this 3/8" Schedule 40 seamless brass pipe boasts an impressive outside diameter of 5.110 inches and a robust wall thickness of 0.300 inches. The inherent properties of brass, including excellent machinability and resistance to a broad spectrum of corrosive media, make this pipe ideal for applications involving water, oil, and gas. Its seamless construction eliminates potential leak paths, ensuring integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate joint sealant or solder flux to pipe ends and fittings. 3. Carefully assemble pipe and fittings, ensuring proper alignment and secure connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe sealant for brass. | Always use sealants specifically rated for brass or compatible with the fluid being conveyed to prevent corrosion. |
| Over-tightening threaded connections. | Threaded brass fittings can be brittle; tighten firmly but avoid excessive force to prevent cracking. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid transfer systems (water, oil, gas), Hydraulic and pneumatic lines, Corrosive environment applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||